Not in production / Not available for sale
The course-setter CS3 is an interface, connected between an electronic compass of I.T. Holland and any riverpilot. By combining the course-setter with a r.o.t. indicator, a ship can be kept on course.
The current heading is automatically chosen when the compass-function on the autopilot is selected.
The autopilot must supply a dc voltage of at least 12V to enable the course-setter. In case of deviations in reference to the set heading, an analog signal is sent to the pilot. This signal can be adjusted, to keep optimal steering-characterics.
Heading changes can be adjusted by means of a separate switchbox available, without having to disable the compass-function on the pilot.

Specifications :

Repeater specifications : width: 144 mm
height: 144 mm
depth: 130 mm
compass card: 125 mm
weight : 800 gr.

Mounting : flush mounted

Illumination: red, adjustable by external adjuster

Mains : 12-35 Vdc
225 mA max @ 12 Vdc

Output signal : adjusted at 20 mV/deg.
range : 5 - 100 mV/deg.

To be used in combination
with compass ITH Type : 6S, 8, 6MC, 9, 9MC

Artikelnummer : 1240015

Repeater specifications :	width: 144 mm height: 144 mm depth: 130 mm compass card: 125 mm weight : 800 gr.
Mounting :	flush mounted
Illumination:	red, adjustable by external adjuster
Mains :	12-35 Vdc 225 mA max @ 12 Vdc
Output signal :	adjusted at 20 mV/deg. range : 5 - 100 mV/deg.
To be used in combination with compass ITH Type :	6S, 8, 6MC, 9, 9MC
Artikelnummer :	1240015